SURFACE PUMPS - SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS - FITTED WITH AUTO CONTROLLER

The self-priming centrifugal electric pumps series JET have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m.
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C.  
Flow rate up to ~ 9.5 m3/h.
Heads up to~60m. 

TECHNICAL FEATURES 
Pump body: cast iron G20 with anti-corrosive coating.
Motor bracket: in die casting aluminium UNI 5076 (cast iron for JET 152-302).
Diffuser, Nozzle & Venturi tube: Techno-polymer.
Impeller: Techno-polymer (stamped brass UNI-EN 12165 JET 152-302).
Pump shaft: stainless steel Aisi 420F (Aisi 304 for JET 152-302). 
Mechanical seal: carbon-ceramics. 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models.
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used.
Class of insulation:F-service:S1-Degree of protection: IP 44.
Terminal board protection: IP 54.

PUMP MODEL
JET 202M 120200001
54m max head
160 Lpm max flow
Self-priming, suction up to 8m
230 Volt 11A 2.0 Hp electric motor
1.5 Bar starting
Cast iron body, nitrile seals
Integrated check valve
Integrated pressure gauge
1"1/2 female pump inlet
1"1/4 female pump outlet
Carbon ceramic mechanical seal
Techno polymer impeller
For clear water up to 60°C

AUTO CONTROLLER 293000112
Auto stop/start for centrifugal pumps
For clean water up to 60°C
230 Volts, 16 Amps, 2.2kW
1.5-10 Bar pump pressure
1.5 Bar starting pressure
Integrated check valve
Integrated pressure gauge
10000 Lph max flow
Protection to IP65
1" male ports
Must be mounted vertically
SUPPLIED WITH LEADS