IMPORTANT NOTICE:- We have temporary suspended our online services to Northern Ireland, Eire and other EU Countries

Sea Land Jet Series Centrifugal Pumps

Sea Land Jet Series Centrifugal Pumps


SURFACE PUMPS - SELF-PRIMING CENTRIFUGAL ELECTRIC PUMPS

Sea Land Jet Series Centrifugal Pumps. Self-priming single impeller pumps. From 45 to 54m max head. From 50 to 160 Lpm max flow. 230 & 415 Volt options. S1 continuous duty motors.

The self-priming centrifugal electric pumps series JET have been designed to pump clean water from wells, even if mixed with gas. Maximum suction up to 8-9 m.
Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 60 °C for other use, while the ambient temperature must not be higher than 40 °C.  
Flow rate up to ~ 9.5 m3/h.
Heads up to~60m. 

TECHNICAL FEATURES 
Pump body: cast iron G20 with anti-corrosive coating.
Motor bracket: in die casting aluminium UNI 5076 (cast iron for JET 152-302).
Diffuser, Nozzle & Venturi tube: Techno-polymer.
Impeller: Techno-polymer (stamped brass UNI-EN 12165 JET 152-302).
Pump shaft: stainless steel Aisi 420F (Aisi 304 for JET 152-302). 
Mechanical seal: carbon-ceramics. 

MOTOR 
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
Incorporated motor protection and capacitor always on, for single-phase models.
The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used.
Class of insulation:F-service:S1-Degree of protection: IP 44. 
Terminal board protection: IP 54. 


Showing 1 to 7 of 7 (1 Pages)