IMPORTANT NOTICE:- We have temporary suspended our online services to Northern Ireland, Eire and other EU Countries

Speroni AKM60 Self Priming Peripheral Pump

Speroni AKM60 Self Priming Peripheral Pump


Speroni AKM60 Self Priming Peripheral Pump

The Speroni AKM60 is a self-priming, peripheral centrifugal pump with a cast iron pump body and bronze impeller. It has a brass impellers, cast iron body and a 304 stainless steel shaft with a carbon-ceramic-NBR mechanical seals. The motor has IP44 protection and incorporates an overload protection device. Being able to develop a high head, with a relatively small motor, it is well suited to domestic and industrial applications such as sprinkling, circulation, feeding pressurized boilers etc. It is designed for pumping clean water only, at liquid temperatures up to 60ºC. These pumps should not be allowed to run dry, but by fitting an optional pressure controller, they can be protected from this and also start and stop them automatically.  It is capable of self-priming up to 7 meters.

APPLICATIONS
Self-priming volumetric water pump able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. It is qualified in domestic fittings, to increase the system pressure in aqueducts and for automatic water distribution by small autoclave tanks or by hydrosphere units. For the correct functioning of the pump, use clean water, or non-agressive liquids only, without sand or other solid impurities.

LIMITS OF USE
Liquid temperature up to 35°C (for home use according to EN 60335-2-41) 
Temperature max. liquid: 60°C (for other uses) 
Ambient temperature up to 40°C 
Total suction lift up to 7 mt. 
Continuous duty

MOTOR
Single-phase 230V-50Hz 
Two-Pole induction motor (n = 2850 min-1) 
Insulation Class F 
Protection IP 44

MATERIALS
Pump body: Cast Iron 
Motor Support: Cast Iron 
Impeller: Brass 
Shaft with rotor: Stainless Steel AISI 304 
Mechanical seal: Ceramic/Graphite/NBR


Showing 1 to 1 of 1 (1 Pages)