Rule Mate 1500 Automatic Submersible Bilge Pump 12V 95 LPM 25-28mm

The Rule Mate RM1500 1500 series automatic submersible bilge pump eliminates the need for a separate float switch to activate the pump. Once power is supplied to the bilge pump, starting and stopping is completely automatic.

The new model of Rule Mate bilge pumps feature a wire coil with a magnet cased in a box as opposed to a mercury float, allowing for space saving to be made. The electromagnetic field is disrupted by water resistance around the box and the pump is activated. The pump also includes a pump check feature where you can test your pumps performance with a wet finger!

The Rule automatic submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The automatic bilge pump features two leads, an automatic (brown) and a manual override (brown with a white stripe). The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.

The Rule submersible bilge pump comes complete with straight hose tail barbs for 25mm (1") and 28mm (1-1/8") ID hose. The built-in automatic bilge pump sensor detects the presence of pure engine oil only and will not activate the pump which minimises the discharge of hazardous materials into the surrounding waterway.

The Rule 1500 series of small submersible bilge pumps are recommended for discharge heads up to a maximum of 3.6 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.

Rule Mate pumps feature a backup device that knows if the electronic bilge switch becomes covered by oil, grease and debris, by checking for water resistance against the impeller. If no water is present the pump will revert to an auto-timed mode, where the pump cycles every 2.5 minutes to check for water, until the sensor has been cleaned. Once the switch is cleaned the pump will revert back to the level sensing mode.

Approvals - ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification
Flow Rate Description - 5679 LPH (1500 US GPH)
Flow Rate 1 Metre Head - 4542 LPH (1200 US GPH)
Fuse - 9A
Height Description - 150mm (5.9"), Switch cut in height: 63.5mm (2-1/2"), Switch cut off height: 19mm (3/4")
Length - 150mm (5.9")
Outlet - 25mm (1") or 28mm (1-1/8") ID Hose
Series - Rule 1500
Type - Bilge Pumps
Voltage Description - 12V DC
Width - 110mm (4.3")
Brand - Rule
Automatic Bilge Pumps - Yes
Maximum Pump Head - 0 to 2.2 Metres
Warranty - 3 Years
Flow Rate 2 Metre Head - 2574 LPH (680 US GPH)
Hose Size - 28mm / 1-1/8"
Maximum Recommended Head - 2 Metres (6.5 Feet)
Model - RM1500
Amps Description - 4.8A at 12V, 7.0A at 13.6V

Write a review

Please login or register to review

Rule Mate 1500 Automatic Submersible Bilge Pump 12V 95 LPM 25-28mm

  • £177.35


Brochure

Related Products