Rule LoPro LP900D Submersible Bilge Pump 12V 56 LPM

The LoPro brings Rule pumping power to tight spaces. The LP900D submersible bilge pump features a fully rotating discharge body for installation flexibility, allowing horizontal or vertical mounting. The Rule LoPro pump is supplied with a choice of different sized discharge ports for 19mm (3/4"), 25mm (1") or 28mm (1-1/8") bore hose.

Rule LoPro pumps also feature a non-return valve in the straight outlets to stop any water running back down into the pump, although this is not in the elbows to avoid a reduction in flow rate. The non-return valve will prevent any water running back down the pipes into the pump, which would then require pumping out again.

For automatic operation please use Rule float switches.

The LoPro bilge pump should only be used in the bilges of leisure craft, if used as a sole or primary bilge pump it is only suitable for vessels up to 24 metres (78.8ft).

The entire pump body swivels up to 180 degrees, making the pump extremely easy to install.

Flow Rate Description - 56 LPM (14.8 US GPM)
Fuse - 7.5A
Height Description - 56mm (2.3"), Switch cut in height: 38mm (1.5")
Length - 193mm (7.6")
Outlet - 19mm (3/4"), 25mm (1") or 28mm (1-1/8") ID Hose
Series - LoPro
Type - Bilge Pumps
Voltage Description - 12V DC
Width - 56mm (2.3") Minimum
Brand - Rule
Automatic Bilge Pumps - No
Maximum Pump Head - 2.3 to 4.27 Metres
Hose Size - 19mm / 3/4", 25mm / 1", 28mm / 1-1/8"
Ignition Protected - Yes
Maximum Recommended Head - 3 Metres (9.84 Feet)
Model - LP900D
Amps Description - 4A