Rule 56S 4000 Automatic Submersible Bilge Pump 12V 252 LPM 50mm

Rule 56S 4000 Automatic submersible bilge pump with a flow rate of up to 252 LPM (66 GPM).

The Rule automatic bilge pump turns on and checks for water every 2 1/2 minutes, during this check the pump runs for approximately 1 second and checks for resistance or drag against the impeller. If resistance is encountered, it will run until water is no longer present.

The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.

The Rule 4000 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 4 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.

Approvals - ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification
Flow Rate Description - 15,142 LPH (4000 US GPH)
Flow Rate 1 Metre Head - 13,351 LPH (3527 US GPH)
Fuse - 25A
Height Description - 235mm (9.25"), Switch cut in height: 38mm (1.5")
Outlet - 50mm (2") ID Hose
Series - Rule 4000
Type - Heavy Duty Bilge Pumps
Voltage Description - 12V DC
Width - 135mm (5.3")
Brand - Rule
Automatic Bilge Pumps - Yes
Maximum Pump Head - 2.3 to 4.27 Metres
Warranty - 3 Years
Diameter Description - Base: 135mm
Flow Rate 2 Metre Head - 11,174 LPH (2952 US GPH)
Hose Size - 51mm / 2"
Maximum Recommended Head - 4 Metres (13.1 Feet)
Model - 56S
Amps Description - 15.5A at 12V, 20A at 13.6V