Rule 53S 2000 Automatic Submersible Bilge Pump 12V 126 LPM 28mm

Rule 53S 2000 Automatic submersible bilge pump with a flow rate of up to 126 LPM (33 GPM).

The Rule automatic bilge pump turns on and checks for water every 2 1/2 minutes, during this check the pump runs for approximately 1 second and checks for resistance or drag against the impeller. If resistance is encountered, it will run until water is no longer present.

The Rule submersible bilge pump is a light weight, compact pump with a tough plastic body and integral strainer. The quick release strainer allows for rapid cleaning of the submersible bilge pump internal components.

The Rule 2000 range of small submersible bilge pumps are recommended for discharge heads up to a maximum of 3 metres. The submersible bilge pump meets ISO8846 marine (ignition) and ISO8849 marine (bilge pump) standards.

Approvals - ISO8846 marine (ignition), ISO8849 marine (bilge pump) standards, CE Certification
Flow Rate Description - 7570 LPH (2000 US GPH)
Flow Rate 1 Metre Head - 6132 LPH (1620 US GPH)
Fuse - 15A
Height Description - 197mm (7.75"), Switch cut in height: 38mm (1.5")
Outlet - 28mm (1-1/8") ID Hose
Series - Rule 2000
Type - Heavy Duty Bilge Pumps
Voltage Description - 12V DC
Brand - Rule
Automatic Bilge Pumps - Yes
Maximum Pump Head - 2.3 to 4.27 Metres
Warranty - 3 Years
Diameter Description - Base: 120mm
Flow Rate 2 Metre Head - 4921 LPH (1300 US GPH)
Hose Size - 28mm / 1-1/8"
Maximum Recommended Head - 3 Metres (9.8 Feet)
Model - 53S
Amps Description - 8.4A at 12V, 12A at 13.6V