This Hypro Roller Vane Pump Torque Arm PTO Kit 3430-0540 is used when you are wanting to drive your Hypro Roller Pump with the PTO shaft on your tractor. You attach this kit to your pump, attach the PTO adaptor to the shaft of the pump, then hang the whole assembly on the back of your tractor's PTO shaft. The torque arm will stop your pump from spinning around.

This kit works on several Hypro Roller Pump models, including the 1502, 1700, 6500, 7560, and the 7700 series.

If you do not already have the PTO 6 spline quick coupler, here is a guide to tell you which adaptor you will need:

6500 series use the 1321-0006

1502, 1700, 7560, and 7700 series use the 1321-0007

See below