|Click to enlarge image(s)|
Watertech Presscontrol 230v
The Presscontrol is a electronic pressure switch and protection device. Can be fitted to almost any pump with outlet pressure of two bar minimum to ten bar maximum with a flow rate of between 40-200 litres per min. The Presscontrol will turn off in the case of no water to protect the pump from dry running. Suitable for most water systems from well, tank or low pressure mains.
Another version called the Controlpress is avalilable for pumps with larger motors to be installed.
8 Amp Maximum
1" Male BSP Inlet / Outlet
Automatically turns on and off a pump
H 165mm x W 170mm x L 230mm