RSD 400 PUMP (JS PUMP) £229.00 Residue Water Drainage Pumps, Puddle Sucker Pumps

FREE NEXT WORKING DAY DELIVERY

Residue drainage pumps, puddle sucker pumps, electric submersible water pump for flooding, burst water mains, flooded cellers and low lying puddles.

RSD-400 Pump by JS Pumps 1 1/4 top outlet with 25mm, 19mm, and 15mm step adapter hosetail. The main feature of the RSD 400 Pump is the ability to drain down to approx 1mm while the remaining flood water can be swept into the pump for removal. Stainless steel outer case, motor pack and shaft. Cast iron motor lid, pump casing and volute. Equipped with non-return valve on the suction of the pump to stop any return of water. Bottom plate made with a cushioned rubber to help against damaging bottoms of tanks. Complete with 10 metres of power cable.

Models featured on this page :-

RSD 400 Pump 230v
RSD 400 Pump 110v
RSD 400 Pump Suction Hose (Bottom of page)
RSD 400 Pump Hose Clips (Bottom of page)

RSD 400 Pumps UK Supplier All Pumps Direct UK

Click to enlarge image(s)

JS Pump Model - RSD-400 Submersible Residue drainage pump 1 1/4" top outlet with 25mm, 19mm, and 15mm step adapter hosetail. The main feature of the RSD 400 pump is the ability to drain down to approx 1mm while the remaining flood water can be swept into the pump for removal. Stainless steel outer case, motor pack and shaft. Cast iron motor lid, pump casing and volute. Equipped with non-return valve on the suction of the pump to stop any return of water. Bottom plate made with a cushioned rubber to help against damaging bottoms of tanks. Complete with 10 metres of power cable.

Model RSD-400 Pump
kW 0.4
230v or 110v
H370
W167
L167
LM180
HM11

MANUFACTURER JS PUMPS

FREE NEXT WORKING DAY DELIVERY

Suction Hose & Hose Clips for the RSD 400 Pump

Special discount price when ordering with these RSD 400 pumps only!

Click to enlarge image(s)

A semi transparent Suction hose suitable for most pumping duties.temperature range -10 to +60 Easy to handle , light and flexible supplied in cut lengths up to the maximum coil size of 50 metres
Resistant to crushing. Light chemicals and fertilizers. A high quality all round hose.

PRICE DOES NOT INCLUDE VAT

SPECIAL PRICE ONLY WHEN ORDERING WITH THESE PUMPS

FREE DELIVERY

Click to enlarge image(s)

Stainless steel hose clip for layflat & Suction hose.

RSD 400 Pump

Click here to download the PDF Sheet

RSD 400 Pump Features

Extremlely light weight and easy to carry (Dry weight only 9.5 Kgs.). Double frame casing. Outer cover made of stainless steel best performed silicon mechanical seal for excellent sealing. Circumferential flow system assures superior cooling effect.Long lasting durability for continious running. Powerful suction. Epoch-making design of bottom strainer enables to suction. Residue water max. up to 2mm in height from the ground. Never leaking any water once sucked. Equipped with typical swing check valve and valve sheet at suction side. So, water once sucked, never return if pump stops. Never damage surface pit as bottom plate comes with the cushion rubber, no surface of pit even if it's made of fibreglass reinforced plastics.

RSD 400 Pump Applications

Pumping out of residue water from receiving tank and pumping pit.
Drainage of bottom water in construction sites, underpasses and underground pits.
Removing residue water in pit and ditch.
Puddles & surface water not draining away.
Pumping water out of swimming pools.

Click to enlarge image(s)

WaterGuard 230v /1Ph A4/ES/1429/G1
Water vole A4/ES/1499

The Waterguard is a versatile unit for 1Ph motor control, or as a monitoring system for high water level or dry running protection.

The Watervole is our level probe sensor with fixed on and off set points. It is fitted with a 10m CPE cable.

An adaptable system for various applications, including :-

Direct control of single phase pumps or motors up to 0.75kW

High water level warning

Dry running protection

Part of monitoring or control system

Accessory:-

Water vole - self contained electrode housing with preset levels for low level pumping, with a facility for level warning. Complete with 6m cable

PRICE DOES NOT INCLUDE VAT

FREE NEXT WORKING DAY DELIVERY

RSD 400 Pump 230v or 110v Residue Drainage Pump

RSD 400 Pump Hydraulic Performance Chart

25mm (1") Suction Hose £2.10 per metre

1" Stainless Steel Hose Clip

SECURE ONLINE PAYMENTS

JS Pumps

RSD 400 Pump PDF Spare Parts & Data Sheet

TT Controls WaterGuard with Water Vole Monitoring and Level Control Alarms