Basic Pump Float Switches Basic Pump Float Switches

FREE NEXT WORKING DAY DELIVERY ON ORDERS OVER £100.00
Float Switches UK Supplier All Pumps Direct UK
Radar JS ST70AB Water Level Float SwitchRadar JS ST70AB Water Level Float SwitchA basic float switch to control a pump for tank filling or emptying. Levels can be achieved by positioning the two weights to give a differential of 50mm to 1000mm.
110v 10 amp max. or 230v 7.5 amp max. inductive loads, can be used for pump control. If pump inductive load is higher then a contractor/starter/control panel must be used. Same applies for applications for three phase pumps.
Agma 22 Level Regulator with Magnetic Hook-up for Submersible PumpsAgma 22 Level Regulator with Magnetic Hook-up for Submersible PumpsThe Agma 22 level regulator is a very useful instrument when used directly on pumps which must work in very small wells and sumps, for which the common float switch would not have enough room to work.
Mac 3 Float Switch for Replacement and RetrofitMac 3 Float Switch for Replacement and RetrofitA float switch with 0.5 metre of cable and a fitted gland to mount on most industrial quality submersible pumps to make them automatic in operation.
Mac 3 Float Switch C/W 10MX3CMac 3 Float Switch C/W 10MX3CA float switch C/W 10MX3C
Mac 3 Small Float SwitchMac 3 Small Float SwitchThe minimum working distance between the Small level regulator and the fixing point is 20 cm. where as the maximum working distance is 50 cm.
Mac 3 Key Float SwitchMac 3 Key Float SwitchThe minimum working distance between the Key level regulator and the fixing point is 20 cm.
Nocchi Pump Float SwitchNocchi Pump Float SwitchNocchi Drenox, Omnia, Pratika, Biox & Priox Pump Float Switch.
Mac 3 Float Switch for Replacement and Retrofit
Click to enlarge image(s)
Mac 3 Float Switch for Submersible Pumps

A float switch with 0.5 metre of cable and a fitted gland to mount on most industrial quality submersible pumps to make them automatic in operation.

The Mac 3 Electromechanical Level Regulator is a float switch which allows electrical equipment to stop and start automatically (usually pumps, but also electric control valves, alarms, etc.) when a prefixed level has been reached. It is highly reliable thanks to a multiple closure device on the fairlead. The Mac 3 is the most universally used float swich in the world for automation of pumps and is used directly by pump producers.

   

Manufacturer Mac 3 Water Systems
Mac 3 Small Float Switch
Click to enlarge image(s)

Mac 3 Small Float Switch

The Small level regulator is a float switch which allows electrical equipment to start and stop automatically (usually pumps, but also electric control valves, alarms, etc.) when a prefixed level has been reached.

The minimum working distance between the Small level regulator and the fixing point is 20 cm. where as the maximum working distance is 50 cm.

   


MANUFACTURER MAC 3 WATER SYSTEMS

Mac 3 Key Float Switch
Click to enlarge image(s)

Mac 3 Key Float Switch

The Key level regulator is a float switch which allows electrical equipment to start and stop automatically (usually pumps, but also electric control valves, alarms, etc.) when a prefixed level has been reached. It is highly reliable thanks to a multiple closure device on the fairlead. This is the most universally used float switch in the world for the automation of pumps and is used directly by pump producers.

The minimum working distance between the Key level regulator and the fixing point is 20 cm.


   

MANUFACTURER MAC 3 WATER SYSTEMS

Mac 3 Float Switch C/W 10MX3C
Click to enlarge image(s)
Mac 3 Float Switch  C/W 10MX3C for Submersible Pumps

   

Manufacturer Mac 3 Water Systems
Agma 22 Level Regulator with Magnetic Hook-up for Submersible Pumps
Click to enlarge image(s)

Agma 22 Level Regulator with Magnetic Hook-up for Submersible Pumps

The Agma 22 level regulator is a very useful instrument when used directly on pumps which must work in very small wells and sumps, for which the common float switch would not have enough room to work. The patented instrument, with magnetic coupling is composed of a float which runs inside a cylinder and has a magnet on top, which, when it is near the upper side, attracts the microswitch lever. The microswitch is placed in a completely sealed box which guarantees a long life to the instrument. Complete with 10 Metre of cable.

   

Manufacturer Mac 3 Water Systems

Nocchi Pump Float Switch
Click to enlarge image(s)

Nocchi Pump Float Switch for Nocchi Submersible Pumps


Nocchi Drenox, Omnia, Pratika, Biox & Priox Pump Spare Float Switch.


MANUFACTURER NOCCHI PENTAIR WATER PUMPS 



Radar JS ST70AB Water Level Float Switch
Click to enlarge image(s)

Radar JS ST70AB Water Level Float Switch


A basic float switch to control a pump for tank filling or emptying. Levels can be achieved by positioning the two weights to give a differential of 50mm to 1000mm.

110v 10 amp max. or 230v 7.5 amp max. inductive loads, can be used for pump control. If pump inductive load is higher then a contractor/starter/control panel must be used. Same applies for applications for three phase pumps.

Operation via two displacement weights
Bottom or side mounting

      

MANUFACTURER RADAR