Pressure Boosting System Accessories Pressure Boosting System Accessories

FREE NEXT WORKING DAY DELIVERY ON ALL ORDERS OVER £100.00

TT PRESS 10 Electronic Pressure Switch 230V 2.0 bar - 10 barTT PRESS 10 Electronic Pressure Switch 230V 2.0 bar - 10 barThe Press 10 is a  electronic pressure switch with built-in dry running protection. They have been designed to be fitted to surface-mounted pumps or inline from submersible well pumps for boosting water supply and low pressure main. Inlet/outlet 1" x 1" Max amp 8 Min temp 60 degrees C Pump pressure start 2.3 bar
TT PRESS 20 Electronic Pressure Switch 230V 2.0 bar - 10 barTT PRESS 20 Electronic Pressure Switch 230V 2.0 bar - 10 barThe Press 20 is a  electronic pressure switch with built-in dry running protection. They have been designed to be fitted to surface-mounted pumps or inline from submersible well pumps for boosting water supply and low pressure main. Inlet/outlet 1" x 1" Max amp 8 Min temp 60 degrees C Pump pressure start 2.8 bar
TT PRESS 30 Electronic Pressure Switch 230V 3.0 bar - 10 barTT PRESS 30 Electronic Pressure Switch 230V 3.0 bar - 10 barThe Press 30 is a  electronic pressure switch with built-in dry running protection. They have been designed to be fitted to surface-mounted pumps or inline from submersible well pumps for boosting water supply and low pressure main. Inlet/outlet 1" x 1" Max amp 30 Min temp 60 degrees C Pump pressure start 3 bar
Sea Land Formula Press Automatic Pump Controller 230vSea Land Formula Press Automatic Pump Controller 230vAuto stop/start for centrifugal pumps
For clean water up to 60°C
230 Volts, 10 Amps
1.5-10 Bar pump pressure
1.5 Bar starting pressure
Intergrated pressure Gauge
10000 Lph max flow
Protection to IP65
1" male ports
Must
Peerless WR 1-7 Pressure Switch HLP506 1-6 BarPeerless WR 1-7 Pressure Switch HLP506 1-6 BarThis pressure switch gives you precise control with setting on/off and differential settings by the aid of visual gauges.
¼" bsp male bottom thread.
Comes complete with bracket for optional wall mounting.
Peerless WR 8-24 Pressure Switch HLP520 8-24 BarPeerless WR 8-24 Pressure Switch HLP520 8-24 BarThis pressure switch gives you precise control with setting on/off and differential settings by the aid of visual gauges.
¼" bsp male bottom thread.
Comes complete with bracket for optional wall mounting.
Fantini B12CN Pressure Switch 0.2-8 BarFantini B12CN Pressure Switch 0.2-8 BarSensitive element with stainless steel diaphragm.
Metal frame.
Shock-proof thermoplastic cover.
1/4" female BSP connection
Fantini BC12DN Pressure Switch 5-16 BarFantini BC12DN Pressure Switch 5-16 BarSensitive element with stainless steel diaphragm.
Metal frame.
Shock-proof thermoplastic cover.
1/4" female BSP connection
Italtecnica PM5 Pressure Switch 0-5 Bar AdjustmentItaltecnica PM5 Pressure Switch 0-5 Bar AdjustmentPressure switch for use with water in autoclave systems.
The switch ensures automatically the starting and stopping of the electric pump according to the set pressure values.
0-5 bar adjustment
1/4" bsp female connection
Italtecnica PM12 Pressure Switch 6-12 Bar AdjustmentItaltecnica PM12 Pressure Switch 6-12 Bar AdjustmentPressure switch for use with water in autoclave systems.
The switch ensures automatically the starting and stopping of the electric pump according to the set pressure values.
6-12 bar adjustment
1/4" bsp female connection
Telemechanique XM6 Pressure Switch 0-5 Bar AdjustmentTelemechanique XM6 Pressure Switch 0-5 Bar Adjustment1/4" bsp female connection
Telemechanique XM12 Pressure Switch 6-12 Bar AdjustmentTelemechanique XM12 Pressure Switch 6-12 Bar Adjustment1/4" bsp female connection
Pressure Gauge MAP-6 6 Bar (Rear Entry)Pressure Gauge MAP-6 6 Bar (Rear Entry)A 50mm round dial pressure gauge with a 1/4" bsp male thread on the rear of the case.
Rating 0-6

Image for illustration purposes only
Pressure Gauge MAP-6 6 Bar (Side Entry)Pressure Gauge MAP-6 6 Bar (Side Entry)A 50mm round dial pressure gauge with a male 1/4" bsp thread on the side of the case.
Rating 0-6

Image for illustration purposes only
Pressure Gauge MAP-10 12 Bar (Rear Entry)Pressure Gauge MAP-10 12 Bar (Rear Entry)A 50mm round dial pressure gauge with a male 1/4" bsp male thread on the rear of the case.
Rating 0-12

Image for illustration purposes only
Pressure Gauge MAP-10 12 Bar (Side Entry)Pressure Gauge MAP-10 12 Bar (Side Entry)A 50mm round dial pressure gauge with a  1/4" bsp male thread on the rear of the case.
Rating 0-12

Image for illustration purposes only
Mac 3 Quickstop Flow Regulator Switch 3/4"Mac 3 Quickstop Flow Regulator Switch 3/4"The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments.
Mac 3 Quickstop Flow Regulator Switch 1"Mac 3 Quickstop Flow Regulator Switch 1"The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments.
Mac 3 Quickstop Flow Regulator Switch 1 1/4"Mac 3 Quickstop Flow Regulator Switch 1 1/4"The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments.
Mac 3 Quickstop Flow Regulator Switch 1 1/2"Mac 3 Quickstop Flow Regulator Switch 1 1/2"The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments. 
R3V Three Ways Brass ConnectorsR3V Three Ways Brass ConnectorsMultiway Fitting R3-V 1"x1"x1"
R5V Five Ways Brass ConnectorsR5V Five Ways Brass ConnectorsMultiway Fitting R5-V 1"x1"x1"x¼"x¼"
Vacuum switchVacuum switchThis vacuum switch will fix to any pipe or pump via its 1/4" female bsp thread and allow the manual switch to turn on a pair of contacts.
As the pump runs the vacuum in the pipe keeps the switch on.
If the water runs out .. The vacuum is lost and the switch turns the pump off.
Tubiflex Flexible Braided Hose 1" X 500mm StraightTubiflex Flexible Braided Hose 1" X 500mm Straight
Tubiflex Flexible Braided Hose 1" X 600mm StraightTubiflex Flexible Braided Hose 1" X 600mm Straight
Tubiflex Flexible Braided Hose 1" X 700mm StraightTubiflex Flexible Braided Hose 1" X 700mm Straight
Tubiflex Flexible Braided Hose 1" X 800mm StraightTubiflex Flexible Braided Hose 1" X 800mm Straight
Tubiflex Flexible Braided Hose 1" X 1000mm StraightTubiflex Flexible Braided Hose 1" X 1000mm Straight
Tubiflex Flexible Braided Hose 1 1/4" X 400mm StraightTubiflex Flexible Braided Hose 1 1/4" X 400mm Straight
Tubiflex Flexible Braided Hose 2" X 500mm StraightTubiflex Flexible Braided Hose 2" X 500mm Straight
Tubiflex Flexible Braided Hose 1" X 500mm ElbowTubiflex Flexible Braided Hose 1" X 500mm Elbow
Tubiflex Flexible Braided Hose 1" X 700mm ElbowTubiflex Flexible Braided Hose 1" X 700mm Elbow
Tubiflex Flexible Braided Hose 1" X 1000mm ElbowTubiflex Flexible Braided Hose 1" X 1000mm Elbow
Peerless WR 1-7 Pressure Switch HLP506 1-6 Bar
Click to enlarge image(s)

Peerless WR 1-7 Pressure Switch HLP506 1-6 Bar


The Peerless Pressure Switch is designed for the monitoring and control of fluids in pressurised systems. 

This pressure switch gives you precise control with setting 0n/off and differential settings by the aid of visual gauges.

¼" bsp male bottom thread.

Comes complete with bracket for optional wall mounting

   

MANUFACTURER PEERLESS
Peerless WR 8-24 Pressure Switch HLP520 8-24 Bar
Click to enlarge image(s)

Peerless WR 8-24 Pressure Switch HLP520 8-24 Bar


The Peerless Pressure Switch is designed for the monitoring and control of fluids in pressurised systems. 

This pressure switch gives you precise control with setting 0n/off and differential settings by the aid of visual gauges.

¼" bsp male bottom thread.

Comes complete with bracket for optional wall mounting

   

MANUFACTURER PEERLESS
Fantini B12CN Pressure Switch 0.2-8 Bar
Click to enlarge image(s)

Fantini B12CN Pressure Switch 0.2-8 Bar


Fantini pressure switches for control and regulation of fluids and non-explosive gases. Suitable for compression tanks, autoclaves, ventilation plants, lubrication plants.

Sensitive element with stainless steel diaphragm.
Metel frame.
Shock-proof thermoplastic cover.
Compliance with standards CEI EN 60947-4-1
Rated insulation voltage Ui 415V~
Continous duty rated current Ith 16A
1/4" female BSP connection

   

MANUFACTURER FANTINI


Fantini BC12DN Pressure Switch 5-16 Bar
Click to enlarge image(s)

Fantini BC12DN Pressure Switch 5-16 Bar


Fantini pressure switches for control and regulation of fluids and non-explosive gases. Suitable for compression tanks, autoclaves, ventilation plants, lubrication plants.

Sensitive element with stainless steel diaphragm.
Metel frame.
Shock-proof thermoplastic cover.
Compliance with standards CEI EN 60947-4-1
Rated insulation voltage Ui 415V~
Continous duty rated current Ith 16A
1/4" female BSP connection

   

MANUFACTURER FANTINI


Italtecnica PM5 Pressure Switch 0-5 Bar Adjustment
Click to enlarge image(s)

Italtecnica PM 5 Pressure Switch 

Pressure switch for use with water in autoclave systems.
The switch ensures automatically the starting and stopping of the electric pump according to the set pressure values.
Electric contacts: normally closed and made of brass alloy with Ag-Hi surfacing.
Terminals with M4 screws and 8 x 8 mm pressure dice.
NBR rubber membrane with textile insert (food grade PM5).
1/4" F hydraulic connection made of galvanised steel.
Standard protection degree IP44.
Max ambient temperature 55C
Tear resistant cable clamps 
0-5 bar adjustment
1/4" bsp female connection

Pressure switches for fire-fighting systems, Pressure switches for water pumps.

   

MANUFACTURER ITALTECNICA

Italtecnica PM12 Pressure Switch 6-12 Bar Adjustment
Click to enlarge image(s)

Italtecnica PM 12 Pressure Switch 

Pressure switch for use with water in autoclave systems.
The switch ensures automatically the starting and stopping of the electric pump according to the set pressure values.
Electric contacts: normally closed and made of brass alloy with Ag-Hi surfacing.
Terminals with M4 screws and 8 x 8 mm pressure dice.
NBR rubber membrane with textile insert.
1/4" F hydraulic connection made of galvanised steel.
Standard protection degree IP44.
Max ambient temperature 55C
Tear resistant cable clamps 
6-12 bar adjustment
1/4" bsp female connection

Pressure switches for fire-fighting systems, Pressure switches for water pumps.

   

MANUFACTURER ITALTECNICA

Telemechanique XM6 Pressure Switch 0-5 Bar Adjustment
Click to enlarge image(s)

Telemecanique XM6 Pressure Switch 0-5 Bar Adjustment


1/4" bsp female connection


Telemechanique XM12 Pressure Switch 6-12 Bar Adjustment
Click to enlarge image(s)

Telemecanique XM12 Pressure Switch 6-12 Bar Adjustment


1/4" bsp female connection


Pressure Gauge MAP-6 6 Bar (Rear Entry)
Click to enlarge image(s)

Pressure Gauge MAP-6 6 Bar Rear Entry


A 50mm round dial pressure gauge with a male 1/4" bsp thread on the rear of the case.
Rating 0-6

Image for illustration purposes only


Pressure Gauge MAP-6 6 Bar (Side Entry)
Click to enlarge image(s)

Pressure Gauge MAP-6 6 Bar Side Entry


A 50mm round dial pressure gauge with a male 1/4" bsp thread on the side of the case.
Rating 0-6

Image for illustration purposes only


Pressure Gauge MAP-10 12 Bar (Rear Entry)
Click to enlarge image(s)

Pressure Gauge MAP-10 12 Bar Rear Entry


A 50mm round dial pressure gauge with a male 1/4" bsp thread on the rear of the case.
Rating 0-12

Image for illustration purposes only


Pressure Gauge MAP-10 12 Bar (Side Entry)
Click to enlarge image(s)

Pressure Gauge MAP-10 12 Bar Side Entry


A 50mm round dial pressure gauge with a male 1/4" bsp thread on the rear of the case.
Rating 0-12

Image for illustration purposes only


R5V Five Ways Brass Connectors
Click to enlarge image(s)

Multiway Fitting R5-V 1"X 1" x 1" x 1/4" x 1/4"



R3V Three Ways Brass Connectors
Click to enlarge image(s)

Multiways Fitting R3-V 1" X 1" X 1"



Mac 3 Quickstop Flow Regulator Switch 3/4"
Click to enlarge image(s)

MAC 3 Quickstop Flow Regulator Switch 3/4"


Instant closure hydraulic regulator

The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments. The new, most important feature of the patent is the rapidity of closing and opening of waterflow in a split second. Such characteristic avoid long noise time caused by a throttled filling with reducing passages of water till the complete closing after some minutes. In old system even in the case of little quantities of water drawn from the tank it would happen the same as dripping. Besides the operation rapidity, the system gives also the possibility to use a differential, so that the new filling intervention occurs only after the drainage of some centimeters of water. As the closing mechanism action is servocontrolled the little float which operates the device enough for any diameter of pipeline to be controlled. The device closing force (which doesn't depend on the float bouiancy, but only on the pipeline pressure) determines the following situation: INCREASES IN LINE PRESSURE INCREASE THE SEAL TIGHTNESS OF THE DEVICE.

The device is made of polycarbonate and assures that the equipment is hygienically protected.
The available input diameters are 3/4" - 1" - 1.1/4" - 1.1/2".
The diameter output is 1" for all input diameters. Its recommended to insert in such diam. a soft plastic pipe and bring the waterflow on the tank footing. This allows to obtain a completly silent filling in any phase.

General characteristics valid for all types:
Container material - Polycarbonate
Operating temperature - 0-=50 degrees C
Storage temperature - -20 +80 degrees C
Serve - continuous
Working pressure 0,2 - 6 bar
Over pressure - 10 bar

   

MANUFACTURER MAC 3 WATER SYSTEMS

Mac 3 Quickstop Flow Regulator Switch 1"
Click to enlarge image(s)

MAC 3 Quickstop Flow Regulator Switch 1"


Instant closure hydraulic regulator

The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments. The new, most important feature of the patent is the rapidity of closing and opening of waterflow in a split second. Such characteristic avoid long noise time caused by a throttled filling with reducing passages of water till the complete closing after some minutes. In old system even in the case of little quantities of water drawn from the tank it would happen the same as dripping. Besides the operation rapidity, the system gives also the possibility to use a differential, so that the new filling intervention occurs only after the drainage of some centimeters of water. As the closing mechanism action is servocontrolled the little float which operates the device enough for any diameter of pipeline to be controlled. The device closing force (which doesn't depend on the float bouiancy, but only on the pipeline pressure) determines the following situation: INCREASES IN LINE PRESSURE INCREASE THE SEAL TIGHTNESS OF THE DEVICE.

The device is made of polycarbonate and assures that the equipment is hygienically protected.
The available input diameters are 3/4" - 1" - 1.1/4" - 1.1/2".
The diameter output is 1" for all input diameters. Its recommended to insert in such diam. a soft plastic pipe and bring the waterflow on the tank footing. This allows to obtain a completly silent filling in any phase.

General characteristics valid for all types:
Container material - Polycarbonate
Operating temperature - 0-=50 degrees C
Storage temperature - -20 +80 degrees C
Serve - continuous
Working pressure 0,2 - 6 bar
Over pressure - 10 bar

   

MANUFACTURER MAC 3 WATER SYSTEMS

Mac 3 Quickstop Flow Regulator Switch 1 1/4"
Click to enlarge image(s)

MAC 3 Quickstop Flow Regulator Switch 1 1/4"


Instant closure hydraulic regulator

The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments. The new, most important feature of the patent is the rapidity of closing and opening of waterflow in a split second. Such characteristic avoid long noise time caused by a throttled filling with reducing passages of water till the complete closing after some minutes. In old system even in the case of little quantities of water drawn from the tank it would happen the same as dripping. Besides the operation rapidity, the system gives also the possibility to use a differential, so that the new filling intervention occurs only after the drainage of some centimeters of water. As the closing mechanism action is servocontrolled the little float which operates the device enough for any diameter of pipeline to be controlled. The device closing force (which doesn't depend on the float bouiancy, but only on the pipeline pressure) determines the following situation: INCREASES IN LINE PRESSURE INCREASE THE SEAL TIGHTNESS OF THE DEVICE.

The device is made of polycarbonate and assures that the equipment is hygienically protected.
The available input diameters are 3/4" - 1" - 1.1/4" - 1.1/2".
The diameter output is 1" for all input diameters. Its recommended to insert in such diam. a soft plastic pipe and bring the waterflow on the tank footing. This allows to obtain a completly silent filling in any phase.

General characteristics valid for all types:
Container material - Polycarbonate
Operating temperature - 0-=50 degrees C
Storage temperature - -20 +80 degrees C
Serve - continuous
Working pressure 0,2 - 6 bar
Over pressure - 10 bar

   

MANUFACTURER MAC 3 WATER SYSTEMS

Mac 3 Quickstop Flow Regulator Switch 1 1/2"
Click to enlarge image(s)

MAC 3 Quickstop Flow Regulator Switch 1 1/2"


Instant closure hydraulic regulator

The MAC3 "QuickStop" is an hydraulic level regulator projected with a new system to debug the typical defects of these equipments. The new, most important feature of the patent is the rapidity of closing and opening of waterflow in a split second. Such characteristic avoid long noise time caused by a throttled filling with reducing passages of water till the complete closing after some minutes. In old system even in the case of little quantities of water drawn from the tank it would happen the same as dripping. Besides the operation rapidity, the system gives also the possibility to use a differential, so that the new filling intervention occurs only after the drainage of some centimeters of water. As the closing mechanism action is servocontrolled the little float which operates the device enough for any diameter of pipeline to be controlled. The device closing force (which doesn't depend on the float bouiancy, but only on the pipeline pressure) determines the following situation: INCREASES IN LINE PRESSURE INCREASE THE SEAL TIGHTNESS OF THE DEVICE.

The device is made of polycarbonate and assures that the equipment is hygienically protected.
The available input diameters are 3/4" - 1" - 1.1/4" - 1.1/2".
The diameter output is 1" for all input diameters. Its recommended to insert in such diam. a soft plastic pipe and bring the waterflow on the tank footing. This allows to obtain a completly silent filling in any phase.

General characteristics valid for all types:
Container material - Polycarbonate
Operating temperature - 0-=50 degrees C
Storage temperature - -20 +80 degrees C
Serve - continuous
Working pressure 0,2 - 6 bar
Over pressure - 10 bar

   

MANUFACTURER MAC 3 WATER SYSTEMS

Tubiflex Flexible Braided Hose 1" X 500mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 500mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 600mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 600mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 700mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 700mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 800mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 800mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 1000mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 1000mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1 1/4" X 400mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1 1/4" x 400mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 2" X 500mm Straight
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 2" x 500mm Straight


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 500mm Elbow
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 500mm Elbow


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 700mm Elbow
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 700mm Elbow


For use on booster sets. 


MANUFACTURER TUBIFLEX


Tubiflex Flexible Braided Hose 1" X 1000mm Elbow
Click to enlarge image(s)

Tubiflex Flexible Braided Hose 1" x 1000mm Elbow


For use on booster sets. 


MANUFACTURER TUBIFLEX