Pentax PM 45 and PMT 45 Peripheral Turbine Pumps Pentax PM 45 and PMT 45 Peripheral Turbine Pumps

FREE NEXT WORKING DAY DELIVERY

PM45 Pumps by Pentax Water Pumps

USES - Peripheral positive displacement pumps with frontal pumps for small household systems and simple industrial applications;
characterised by a considerable ratio between performance and required output.

CONSTRUCTION FEATURES - Cast iron pump casing (mod. PM) with threaded intake and delivery openings ; pump casing available in bronze (mod. PM45-Br) ; cast iron motor bracket or bronze on request (mod. PM45-Br); radial blade brass impeller; ceramic - graphite mechanical seal; motor shaft in AISI 416 steel ; world leading brand ball bearings; liquid temperature range 0 - 90 °C; max. operating pressure 6 bar (8 bar for PM80).

MOTOR - 2 pole electric induction motor for continuous operations; stator made with low-loss laminated electric sheet steel;insulation Class F; IP 44 protection level; thermal protection for single-phase models; the user is responsible for supplying protection for the three-phase models.

Pentax PM45 Pumps UK Supplier All Pumps Direct UK

Pentax PM45 Pump Peripheral Turbine Water Pump 230v 40 Lpm 40 Hm
Click to enlarge image(s)

Pentax PM45-BR Pump 230v


Pentax PM 45 Pumps range are peripheral turbine pumps, made to develop high pressure with limited flow rates. The pump impeller and pump casing are made of brass.
Clean water only with a maximum tamp of 70°C.
Pentax PM 45 Pumps are used mainly for water pressure boosting of small scale booster systems and washing systems.

Material - BRASS
LM/HM - 40/40
kW - 0.37

   

MANUFACTURER PENTAX WATER PUMPS

FREE NEXT WORKING DAY DELIVERY

Pentax PMT45 Pump Peripheral Turbine Water Pump 415v 40 Lpm 40 Hm
Click to enlarge image(s)

Pentax PMT45-BR Pump415v


Pentax PMT 45 Pumps range are peripheral turbine pumps, made to develop high pressure with limited flow rates. The pump impeller and pump casing are made of brass.
Clean water only with a maximum tamp of 70°C.
Pentax PMT 45 Pumps are used mainly for water pressure boosting of small scale booster systems and washing systems.

Material - BRASS
LM/HM - 40/40
kW - 0.37

   

MANUFACTURER PENTAX WATER PUMPS

FREE NEXT WORKING DAY DELIVERY

Pentax PM45-A  Automatic Electronically Controlled Single End Pump Unit 230v 40 Lpm 40 Hm
Click to enlarge image(s)

Pentax PM45-A Automatic Electronically Controlled Single End Pump Unit

Pentax PM-45A 230v Automatic electronically controlled single end pump unit fitted with Watertech Presscontrol. For hot or cold pressure boosting. 1" female thread on pump inlet, 1" male outlet thread on presscontrol unit. Max flow 40 litres per minute, maximum pressure 4 bar. Switches on when an outlet is opened and switches off in approx 6-8 seconds when outlet is shut. Also has the feature of dry run protection.

H 345 X W 225 X L 260

         

MANUFACTURER PENTAX WATER PUMPS & WATERTECH

FREE NEXT WORKING DAY DELIVERY

Pentax PM45 Pump Performance Chart

Pentax PM45 Pump Performance Chart