Nocchi Waterpress Inox & Superinox Domestic Booster Sets Nocchi Waterpress Inox & Superinox Domestic Booster Sets

 FREE NEXT WORKING DAY DELIVERY ON ORDERS OVER £100.00

Waterpress Inox & Superinox by Nocchi Pentair Water Pumps

The pressure of domestic water supply systems is not always enough to supply the correct amount of water at a suitable pressure to all users. You have surely found youself having a shower with a thin stream of water when others are using it at the same time. The best and most affordable solution to solve water deficiency problems is to install one the booster sets of the Nocchi line. These systems are specifically designed to boost the pressure of water supply systems and deliver the correct amount of water to all points of the house, including the upper floors. This guarantees the availability of water to all users.The pre-set pressure switch enables it to automatically start and stop the pump. The spare water inside the reservoir prevents the pump from restarting if a small amount of water is requested, thus protecting it from excessive wear and enabling users to save power. The Nocchi Waterpress booster sets are produced with Nocchi Jetinox or Nocchi MAX and MCX pumps. They are supplied wired, complete with 25 or 60 litre expansion tank, ready to use.

Nocchi booster sets are supplied ready to be installed and used.

Nocchi Waterpress Inox & Superinox UK Supplier All Pumps Direct UK

Nocchi Waterpress Superinox 60-50 (1000-24) Booster Pump Unit 230v 55 Lpm 45 HmNocchi Waterpress Superinox 60-50 (1000-24) Booster Pump Unit 230v 55 Lpm 45 Hm
25 Litre Pressure Vessel 
Nocchi Waterpress Superinox 90-50 (2000-24) Booster Pump Unit 230v 90 Lpm 50 HmNocchi Waterpress Superinox 90-50 (2000-24) Booster Pump Unit 230v 90 Lpm 50 Hm
25 Litre Pressure Vessel 
Nocchi Waterpress Superinox 120-60 Booster Pump Unit 230v 100 Lpm 55 HmNocchi Waterpress Superinox 120-60 Booster Pump Unit 230v 100 Lpm 55 Hm
25 Litre Pressure Vessel 
Nocchi Waterpress Superinox 120-60+ Booster Pump Unit 230v 100 Lpm 55 HmNocchi Waterpress Superinox 120-60+ Booster Pump Unit 230v 100 Lpm 55 Hm
60 Litre Pressure Vessel 
Pentax Inox 80 Jet Pump Self Priming Pump Pressure Booster Unit 110v 40 Lpm 45 HmPentax Inox 80 Jet Pump Self Priming Pump Pressure Booster Unit 110v 40 Lpm 45 Hm
25 Litre Pressure Vessel
Nocchi Waterpress Superinox 60-50 (1000-24) Booster Pump Unit 230v 55 Lpm 45 Hm
Click to enlarge image(s)
Nocchi Waterpress Superinox 60-50 (1000-24) Booster Pump Unit 230v 55 Lpm 45 Hm

Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.
The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested, protecting it from excessive wear and enabling users to save power.
These booster sets are supplied ready to be installed and used. Do not allow to run dry.

Automatic Pressure Set
25 Litre Pressure Vessel - Stainless Steel
Centrifugal Impeller
230v 50Hz
0.8Kw
55 Litres Per Minute Maximum
45 Metres Head Maximum
7 Metres suction Head Maximum
1" BSP Female Inlet & 1" BSP Female Outlet 
H 550mm x W 280mm x L 530mm
11Kg
For cold pressure boosting.
Switches on and off automatically when an outlet is opened closed

   


MANUFACTURER NOCCHI PENTAIR WATER PUMPS
Nocchi Waterpress Superinox 90-50 (2000-24) Booster Pump Unit 230v 90 Lpm 50 Hm
Click to enlarge image(s)
Nocchi Waterpress Superinox 90-50 (2000-24) Booster Pump Unit 230v 90 Lpm 50 Hm

Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.
The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested, protecting it from excessive wear and enabling users to save power.
These booster sets are supplied ready to be installed and used. Do not allow to run dry.

Automatic Pressure Set
25 Litre Pressure Vessel - Stainless Steel
Centrifugal Impeller
230v 50Hz
0.8Kw
90 Litres Per Minute Maximum
50 Metres Head Maximum
7 Metres suction Head Maximum
1" BSP Female Inlet & 1" BSP Female Outlet 
H 550mm x W 280mm x L 530mm
11Kg
For cold pressure boosting.
Switches on and off automatically when an outlet is opened closed

   


MANUFACTURER NOCCHI PENTAIR WATER PUMPS
Nocchi Waterpress Superinox 120-60 Booster Pump Unit 230v 100 Lpm 55 Hm
Click to enlarge image(s)
Nocchi Waterpress Superinox 120-60 Booster Pump Unit 230v 100 Lpm 55 Hm

Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.
The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested, protecting it from excessive wear and enabling users to save power.
These booster sets are supplied ready to be installed and used. Do not allow to run dry.

Automatic Pressure Set
25 Litre Pressure Vessel - Stainless Steel
Centrifugal Impeller
230v 50Hz
0.25Kw
100 Litres Per Minute Maximum
55 Metres Head Maximum
7 Metres suction Head Maximum
1" BSP Female Inlet & 1" BSP Female Outlet 
H 550mm x W 260mm x L 520mm
13Kg
For cold pressure boosting.
Switches on and off automatically when an outlet is opened closed

   


MANUFACTURER NOCCHI PENTAIR WATER PUMPS
Nocchi Waterpress Superinox 120-60+ Booster Pump Unit 230v 100 Lpm 55 Hm
Click to enlarge image(s)
Nocchi Waterpress Superinox 120-60+ Booster Pump Unit 230v 100 Lpm 55 Hm

Self priming single pump booster complete with pressure switch and mild steel accumulator vessel. Water supply is not always enough to supply the correct amount of water at a suitable pressure, so the best and most affordable solution to solve water deficiency problems is to install a pumped booster system via a break tank. These systems are specifically designed to boost the pressure of the water supply and deliver the correct amount of water to all outlets.
The pre-set pressure switch enables it to automatically start and stop the pump. The water inside the reservoir prevents the pump from restarting if a small amount of water is requested, protecting it from excessive wear and enabling users to save power.
These booster sets are supplied ready to be installed and used. Do not allow to run dry.

Automatic Pressure Set
60 Litre Pressure Vessel - Stainless Steel
Centrifugal Impeller
230v 50Hz
0.25Kw
100 Litres Per Minute Maximum
55 Metres Head Maximum
7 Metres suction Head Maximum
1" BSP Female Inlet & 1" BSP Female Outlet 
H 640mm x W 370mm x L 640mm
23Kg
For cold pressure boosting.
Switches on and off automatically when an outlet is opened closed

   


MANUFACTURER NOCCHI PENTAIR WATER PUMPS
Pentax Inox 80 Jet Pump Self Priming Pump Pressure Booster Unit 110v 40 Lpm 45 Hm
Click to enlarge image(s)

Pentax Inox 80 Jet Pump Pressure Boosting System 110v


USES - Self-priming centrifugal pump for water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks for transferring liquids and emptying tanks; used in medium sized industrial applications and for gardening.

CONSTRUCTION FEATURES - AISI 303 stainless steel pump casing with threaded inlet and outlet; aluminium motor bracket and AISI 303 stainless steel mechanical seal holder; Noryl® impeller ceramic - graphite mechanical seal; motor shaft in AISI 416 steel; world leading brand ball bearings; liquid temperature range 0 - 50 °C; max. operating pressure 6 bar.

MOTOR - 2 pole electric induction motor for continuous operations; stator made with low-loss laminated electric sheet steel Insulation Class F; IP 44 protection level; thermal protection for single-phase models; the user is responsible for supplying protection for the three-phase models.

1" BSP Female inlet and outlet
H 199mm x W175mm x L360mm
14Kg
Suitable for site water booster systems, washing systems and garden irrigation.
Complete with 25 litre pressure vessel, pressure switch and guauge.

   

MANUFACTURER PENTAX WATER PUMPS

FREE NEXT WORKING DAY DELIVERY

Nocchi Waterpress Performance Chart

Nocchi Waterpress Performance Chart

Nocchi Waterpress Performance Chart

Nocchi Waterpress Performance Chart