 |
|||||||||||||||||||
|
|
||||||||||||||||||
Nocchi CPS fitted DHI 27 & 45 frequency changer pump
CPS DHI 27 & 45 230v. High flow and pressure in performance. 1¼" inlet and outlet. Stainless steel impellers and diffusers. Carbon mechanical seal. Not self priming and should not be allowed to run dry. Clean water only with no solids or abbrasives. Maximum liquid temperature 90°c. Uses include booster systems, washing and irrigation. Pre built CPS frequency changer water boosting pump. Must be used in conjunction with a accumulator vessel. Nocchi CPS fitted MAX 80/60 & 120/60 frequency changer pump
CPS MAX 80/60 & 120/60 230v. High flow and pressure in performance. 1" inlet and outlet. Technopolymer impellers and diffusers. Carbon mechanical seal. Not self priming and should not be allowed to run dry. Clean water only with no solids or abbrasives. Maximum liquid temperature 50°c. Uses include booster systems, washing and irrigation. Pre built CPS frequency changer water boosting pump. Must be used in conjunction with a pressure accumulator vessel. Nocchi CPS fitted Multinox VE 200/40 & 200/65 frequency changer pump
Pre built CPS frequency changer water boosting pump. Multi Ve vertical multistage pumps are used for a range of pressure boosting applications. High performance along with various different pressures available throughout the range. Booster units, single or twin or as a wash down set are examples. Ideal when high performance and compact dimensions are required. Clean water only with no suspended solids or abbrasives. These units cannot be run dry. Maximum liquid temperature 50°c. Impellers and diffusers made from technopolymer. Carbon mechanical seal. Must be used in conjunction with a pressure accumulator vessel. Nocchi CPS fitted VLR frequency changer pumps
Pre built CPS frequency changer water boosting pump. VLR Multistage Pumps, Verticial multistage in line suction and delivery ports Stainless steel 304 impellers,diffusers and outercase and 431 stainless steel shaft . Must be used in conjunction with a pressure accumulator vessel. |
Nocchi CPS Frequency Changer Nocchi CPS energy saving control system keeps constant delivery when pressure variations occur. CPS frequency converter intergrated into the pump which adjusts motor speed so as to constantly provide users with the same pressure, even when demand for water changes. The main applications for CPS offers elevated comfort and benifits are: home pressurisation, irrigation, greenhouses, light industry, fountians and creative water displays. Operation The system consists of an electric pump operated by an electronic control system (speed variator) that enables the delivery of constant pressure by reducing or increasing the flow rate based on water demand. In the case of an excessive system pressure decrease, CPS starts the pump and and regulates its speed until the operating pressure is re-establised. The pump's speed depends water demand. If water consumption increases, the control system raises the speed of the pump up to maximum set valve. If water consumption decreases, the speed of the pump is reduced down to its minimum. If there is no further water demand the pump stops. Technical Features Power imput 1x230 Vac +10% Output voltage 3x230 Vac + 10% Max nominal power 1.5 Kw Input frequency 50/60 Hz + 3% Max output current 6.5 Amp Protection IP55 Ambient temperature from +0 degree C to + 40 degree C Wave type Sinusoidal Input filter In compliance with EMC directive Pressure transmitter 0 - 5- Volt 0 - 10 Bar Set point 2 Connections RS 85 port Free contacts 3 ( ext set point, alarm, system inhibition ) |
||||||||||||||||||
