Hot Water Float SwitchV-Hg range are stainless steel bulb floats with silicone cable for hot water and vapour applications where Mercury internals are acceptable. Double action float for emptying and filling 3 core connections operation at 5 degrees. Tilt from centre for ease of operation. High Temperature V "HG" max 130 degree C
Minimatic Single Action Float SwitchMinimatic Float single operation with cable. Single operation float switch with
contacts suitable for up to 2hp switching load
Outer case in one piece press blown moulded moplen.
Stainless steel Ball operating on quality microswitch
Minimatic Double Action Float SwitchMinimatic Floatswitch Double operation with cable. Double operation float switch for filling and emptying with
contacts suitable for up to 2hp switching load
Outer case in one piece press blown moulded moplen.
Stainless steel Ball operating on quality microswitch
Multi Contact Sewage Float SwitchA sewage float switch with cable which instead of actually floating just tilts in heavily soiled liquid.
The float switch will operate on and off contacts at just 5 degrees each side of a center line.
Designed to work in pairs with connection to a panel to control sewage pumps.
Designed for a 10a max resistive load.
3 sets of contacts are operated by a stainless steel ball to ensure long and trouble free life.
Multi Contact Oil & Fuel Oil Float SwitchA sewage type float switch with cable which instead of actually floating just tilts in heavy or viscous liquid. The cable is silicon compound and is inert to hydrocarbons so the float is suitable for fuel oil and heavy oil applications.
Probes & Probe ControlsProbe sensor complete 2 core cable.
If using with our basic probe panels two are required minimum.
Submatic electronic control units to be used with two 'N's allowing emptying or filling without the need for float switches. levels are dependant on the difference in the positions of the probes.