IMPORTANT NOTICE:- We have temporary suspended our online services to Northern Ireland, Eire and other EU Countries

Speroni CA (M) Self Priming Twin Impeller Jet Pumps

Speroni CA (M) Self Priming Twin Impeller Jet Pumps


Speroni CA (M) Self Priming Twin Impeller Jet Pumps 

The Speroni CA(M) series are twin impeller, self-priming centrifugal pumps with bodies, ejectors and motor supports in cast iron. Impellers and venturis are in thermoplastic. They have stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals and have IP44 motors. Single phase motors incorporate an overload protection device. They are designed for pumping clean water only at a maximum temperature of 35ºC. They should not be allowed to run dry. The pumps offer a wide pressure range for industrial boosting purposes, while their low operating noise, low power consumption also make them popular for a variety of domestic and horticultural applications. They are capable of self-priming up to 9 metres, but can go up to 35 metres by fitting the ejector (supplied) to a double hose and foot-valve. 

APPLICATIONS
Self-priming twin-impeller water pumps with ejector for suction up to 9 mt. A suction up to 35 mt. depth can be allowed by taking the ejector down and connecting it to the pump by means of a double hose and a foot valve. Suitable for civil and industrial purposes and to drain clean and soda water and non-aggressive liquids.

LIMITS OF USE
Liquid temperature up to 35°C (for home use according to EN 60335-2-41) 
Temperature max. liquid: 35°C (for other uses) 
Ambient temperature up to 40°C 
Total suction lift up to 9 mt. 
Continuous duty

MOTOR
Single-phase 230V-50Hz 
Three-phase 230/400V-50Hz 
Two-Pole induction motor (n = 2850 min-1) 
Insulation Class F 
Protection IP 55

MATERIALS
Pump body: Cast Iron 
Motor Support: Cast Iron 
Impellers: Noryl 
Diffuser: Noryl 
Ejector: Cast Iron 
Shaft with rotor: Stainless Steel AISI 304 
Mechanical seal: Ceramic/Graphite/NBR


Showing 1 to 4 of 4 (1 Pages)