IMPORTANT NOTICE:- We have temporary suspended our online services to Northern Ireland, Eire and other EU Countries
  • Coelbo ControlPump F15 Automatic Pump Controller Pressflow Tech

Coelbo Controlpump F15 Automatic Pump Controller -  Pressflow Tech

Electronic pump controller through internal flow and pressure sensors with internal accumulation membrane. Inlet and outlet at 90 degrees. Starts and stops the pump ‘on demand’.

When a valve or tap is opened on the outlet side of the control, the Coelbo Controlpump senses a drop in pressure and instantly starts the pump. When the valve is closed the pump continues to run for a further 10 seconds to prevent water hammer, and then stops ready for the next demand for water. If the pump runs out of water during operation, the Controlpump will automatically shut down the pump to prevent damage. Once the water supply is restored the Controlpump can be manually re-set by pressing the red button.

The pressure gauge can be fitted to the left or right and the unit must be installed vertically.

Specifications

Auto stop / start

Dry run protection with manual reset

No water hammer

Simple installation

Maximum liquid temperature: 60ºC

Maximum pump size: 1.5kW

IP65 Protection

Fixed re-start pressure 1.5 bar

Voltage 230v

Current 10A

100 Lpm

Inlet 1" M

Outlet 1" F



Write a review

Please login or register to review

Coelbo ControlPump F15 Automatic Pump Controller Pressflow Tech

  • £110.00


Brochure

Related Products